IoT Project Day: Ideas, Reference Boards and Prototypes
Plus an exciting quiz on IoT
IoT Project Day is our quarterly event. It's an event for exchanging knowledge, inspiring others and networking with peers. It really doesn't matter how trivial the project, we give chance to everyone to showcase what they have built, get feedback, learn and iterate. By having college students and industry folks on the same platform, students become aware of industry trends and project opportunities. As usual, we are happy to have it at Microsoft, Bangalore, and we thank them for opening up their venue for this purpose. We also thank all presenters who gave demos and withstood the barrage of tough questions from the audience!
Here's a summary of the demos:
Vehicle Monitoring via OBD and GPRSChaitanya and Jayanth U, Dayananda Sagar University
The demo hardware used an Arduino Mega because it has three UART interfaces. These were used to connect to GPRS module, Bluetooth module and GPS module. The board could be powered from the car's dashboard using a typical power cord. The interesting part is that every car uses potentially a different protocol to communicate over the On-Board Diagnostic (OBD) port. However, the number of such protocols is finite and well defined. An OBD adapter (available for about Rs. 300) can decode all these protocols and convert them into a single Bluetooth interface. Hence their demo unit collects the data via Bluetooth. The Arduino does some processing. The data is tagged with current location coordinates and finally sent to the cloud via GPRS. The students shared a few use cases plus challenges to make it better.
Steps to Choosing the Right MicrocontrollerSriharsha Sadaralahalli, Microchip India Pvt Ltd
Choosing the right microcontroller for your application can be a daunting challenge because, as Sriharsha pointed out, there are thousands of MCUs just from Microchip alone. There are of course tools that help you filter by features and narrow down the choice. Still, how do we start this process of choosing the right one? Sriharsha laid out a step-by-step procedure to do this. You start with your application in mind and figure out the peripherals you need. You then define the processing and memory capability needed. You may want to look at the core architecture, which was more important in the past when folks did assembly-level coding. If it's a battery-operated device, you will want to look at different sleep modes and power consumption. Cost is always an important criterion along with part availability. Once these design choices are made, you will want to select a suitable development kit or evaluation board to speed up the development. The talk ended with a couple of demos: a weather monitoring station plus an accelerometer that indicates the tilt via colourful LEDs. This talk was definitely useful to many beginners in the audience.
Computer-on-modules and a HMI DemoChandrasekhar Naishadham and Manoj Kumar Verma, Toradex Systems (India) Pvt Ltd
Toradex is a Swiss company that has a strong presence in Bangalore. Hardware, software, reference designs and many other things are done in-house, which means that customers can count on good technical support. Why COM? The main processor and memory are kept independent of the real-world interfaces. This gives flexibility. You can start with a minimal product and evolve the capability without designing the entire hardware again. Toradex also guarantees long-term availability so that your design can stay in the market longer while you work on your next product. The main takeaway for many was that we often make a choice based on cost alone. It's only when the product fails at customer premises that we start wishing we had selected better components. The talk ended with a HMI demo. Toradex also showcased many COMs that are currently on their portfolio. Currently, these are based on Marvell, Freescale or Nvdia. Soon new COMs based on Qualcomm will be out.
An Energy Monitoring and Analysis PlatformVikas
Vikas hails from Rajasthan, where he has figured out that 75% of electricity consumption in his home is coming from fans. He also knows exactly how much CFL lamps are consuming. Perhaps he can do better by changing these to LED lamps. But how exactly is he able to get these numbers? Vikas explained that he has built an efficiency monitoring energy meter. This collects current and voltage measurements. The system may also use additional sensors placed at specific power sockets or at appliances. All this data is put through ML models to do analytics. The model is able to predict the bill for the month even if we are only a few days into the month. It can offer suggestions on how to save electricity. He has also developed a React JS frontend to visualize the data via nice charts. His passion is to take up projects that can help the poor and needy.
- IoT Project Day: A Fascinating Session of Demos and Ideas
- IoT Project Day: Talks That Inspired Us to Make and Innovate
- IoT Project Day: Drone, Gloves, Keyboards and Analytics
About the Author
Arvind Padmanabhan graduated from the National University of Singapore with a master’s degree in electrical engineering. With more than fifteen years of experience, he has worked extensively on various wireless technologies including DECT, WCDMA, HSPA, WiMAX and LTE. He is passionate about tech blogging, training and supporting early stage Indian start-ups. He is a founder member of two non-profit community platforms: IEDF and Devopedia. In 2013, he published a book on the history of digital technology: http://theinfinitebit.wordpress.com.